• Fits 20-55" TVs with Hole Patterns up to VESA 400x400 (16x16”) and up to 115lbs
• Mounts to Two 16” Wooden Studs as well as All Types of Masonry
• Easy lift and lock Attachment with Adjustable Pull Tabs
• Allows for 3 degrees of Rotation Adjustment to Level after Installation
• Includes a Twisted Veins 10' HDMI cable and a 6" 3-axis Magnetic Bubble Level

Product Description

Low Profile

Extremely low Profile of 1”. The profile does provide a very clean and modern look. In order to get this low of a profile this mount does not Tilt. It is a flat mount that locks the TV in place. Additionally, if you have rear facing HDMI ports you will need to get a 90° or 270° right angle adapter. The head of the cable on rear facing TVs is too thick to fit behind this mount.

 

Lift and Lock

This mount utilizes a lift and lock design.

What this does for you:

1. Easy Installation. Install the brackets to your TV, Install the wall plate to your wall and then you simply hang the TV and the easy latches lock it in place.

2. When changing cables or inputs, you can easily pull the tab to disconnect the lower anchors and you can angle your tv away from the wall, allowing easy access to the AV inputs.

3. If you have your TV mounted and need to take the TV down to paint or for any other reason, there are no tools required for installation or removal once the mount is installed on the wall.

 

Up To VESA 400

VESA 400 Max Mounting.

VESA is the standard used for explaining the distance between the holes on the back of your TV. This mount will accommodate up to VESA 400. To simplify, that means if the holes on the back of your TV are less than 16” apart and the TV weighs less than 115 lbs. this mount will work for you. This mount is in general ideal for 27, 32, 40, 46, 50, 55 and some 60 or 65” TVs depending on weight and compatible hole patterns. Common VESA Patterns for this mount are 100x200, 200x200, 200x300, 300x300, 300x400, 400x400

 

Multi Type Wall Installation

Included in this mount is the hardware to install this to wood Studs spaced 16” apart or closer. This is the standard in most homes, but some interior walls or commercial walls will have a 24” stud spacing. If you have 24” Studs you may need additional hardware to use this mount. We also include Masonry anchors. The anchors included are not designed for Drywall or Gypsum board. If you want to install into drywall alone, you will need toggle or molly bolts. These bolts are not included. It is important to remember that if you install into drywall the holding strength is reduced and will vary by the quality of your anchor and the drywall you are mounting to.

mage Disclaimer

Image disclaimer
all images used are for illustrative purposes only. Individual features such as bag/packaging fabrics, labels, and other materials’ colors may vary, as may peripheral elements (seals, frames, etc.). Please note pictures of products were taken in different light conditions and using the various photographic equipment. Computer screens have different individual settings that moderate colors and patterns independently. The images used on the website are for reference only and does not reflects the actual configuration of the product.

We do not provide any guarantee as to the accuracy, completeness or suitability of the images shown of the products for any particular purpose. You acknowledge that such information and materials may contain inaccuracies or errors and we expressly exclude liability for any such inaccuracies or errors to the fullest extent permitted by law.